Welcome, Guest. Please login or register.
October 21, 2018, 07:09:59 PM
Home Help Login Register
News: Please post general conversations, videos, music, and similar stuff in the "Tips, Tricks and General MCI conversations" section, use the Misc section for any product not listed in the categories, parts or custom projects. Thanks!

+  MCI Console and Tape Machine Forum
|-+  MCI Consoles
| |-+  JH-500 Series Consoles (Moderator: Roginator)
| | |-+  Control Room Mon Select Switches
« previous next »
Pages: [1] Print
Author Topic: Control Room Mon Select Switches  (Read 1092 times)
MCI Member
Offline Offline

Posts: 37

« on: October 19, 2016, 11:30:50 AM »

Hi all,
Just today, the TAPE 4 button popped out of the row, the plastic is broken and the spring popped out etc. Does someone still have a complete assembly of switches etc for the control room? Or any info where to get one?
Thanks  Andreas
MCI Member
Offline Offline

Posts: 212

« Reply #1 on: November 27, 2016, 04:52:02 PM »

It is possible to replace the individual switch if care is taken.  You need to carefully bend the 4 small tags that hold it in place.  Desolder it.   You then get a new switch & remove the latching mechanism (piece of bent wire) & it's retaining sping (around the bit you push).    Then insert the switch into place in the latching mechanism.   Gently bend the retaining tags down & check that the latching mechanism still works well.    Then resolder.
Pages: [1] Print 
« previous next »
Jump to:  

Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!