Welcome, Guest. Please login or register.
December 11, 2017, 07:31:53 PM
Home Help Login Register
News: In order for you to be able to post a new thread in the "For Sale" board, you need at least 10 posts in the rest of the forum, however you'll be able to reply to any topic in the forum even if you dont have the 10 post count. Any posts in the "For Sale" board will not appear in your total post counter.

Any ads, should be posted in the "For Sale" or "Looking to Buy" forums ONLY, and they should be MCI or MCI-related. Please do not advertise your item on someone else's thread (hijack).

If you have any questions, feel free to contact me.

Thanks!

Dualflip

+  MCI Console and Tape Machine Forum
|-+  MCI Consoles
| |-+  JH-600 Series Consoles (Moderator: Westrek)
| | |-+  MCI JH600 Auto Fader Packs
« previous next »
Pages: [1] Print
Author Topic: MCI JH600 Auto Fader Packs  (Read 269 times)
Robomatic
MCI Member
**
Offline Offline

Posts: 65


« on: February 27, 2017, 07:16:31 AM »

Hi All. There is a trimmer pot on the pc board on my auto faders packs in my JH636. Does anyone know exactly what that is for? Is there an easy procedure to adjust?

Thanks,

Rob
Logged
Harrison
MCI Master
MCI Member
*****
Offline Offline

Posts: 305


« Reply #1 on: February 27, 2017, 08:22:56 AM »

Distortion trim for the VCA. There are no other adjustments.
What do you want to adjust?
Logged
Robomatic
MCI Member
**
Offline Offline

Posts: 65


« Reply #2 on: March 03, 2017, 08:53:15 PM »

Wanted to check them. Is there an easy way to do this?
Logged
Harrison
MCI Master
MCI Member
*****
Offline Offline

Posts: 305


« Reply #3 on: March 04, 2017, 05:44:41 PM »

You did not answer the question.
The pot is a distortion trim for the VCA. ie a trim for a minimum.

The old best way is with SMPTE IMD, although some will prefer THD.
And then there's the discussion as to where the fader is when you set this value. MCI used the Crown/Amcron IMD analyser with the fader at the top and measure at the following 2003/5534.

BUT, since we rarely use the fader at the top, would it not be better to optimise the trim at fader zero as opposed to VCA zero. ie you get different results depending on which position you choose.

In the absence of any test gear, you could do this adding 2 out of phase signals together. 2 identical line in, but one has fader flip. Set both to the same gain and to the same left or right. phase change one.
Adjust one of them to really null out signal, then adjust distortion trim to improve that nulling

The point being that the one with the rotary pot will be slightly cleaner than the one with VCA. (If you've got black 202s, this is really obvious), and what you can't null out is the remaining VCA artefact.

But of choice, some form of distortion measurement, please.

Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!