Welcome, Guest. Please login or register.
December 11, 2017, 07:24:29 PM
Home Help Login Register
News: Please post general conversations, videos, music, and similar stuff in the "Tips, Tricks and General MCI conversations" section, use the Misc section for any product not listed in the categories, parts or custom projects. Thanks!

+  MCI Console and Tape Machine Forum
|-+  MCI Tape Machines
| |-+  JH-16 and JH-24 (Moderator: Westrek)
| | |-+  Jh16/100 won't play
« previous next »
Pages: [1] Print
Author Topic: Jh16/100 won't play  (Read 34 times)
windmill
MCI Member
**
Offline Offline

Posts: 48


« on: December 04, 2017, 06:50:22 PM »

Hi,

I've got a jh16/100...the deck won't go into play or record mode and stop switch stays lit.
The tape sensor engages but the capstan and pinch roller do not activate.
All other functions work in fast forward and rewind...stop button turns on and off in these modes as well.

I've reflowed the molex and reseated ICs...I get proper voltage on motherboard.
I've checked transistors in the MDA.

I've tried to wiggle the boards and such with no change in behavior.

If I remove the PLAY ic 7410n on the logic board the capstan and pinch roller both activate.


Thanks for all the help:)

Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!