Welcome, Guest. Please login or register.
October 21, 2018, 08:02:17 PM
Home Help Login Register
News: Please post general conversations, videos, music, and similar stuff in the "Tips, Tricks and General MCI conversations" section, use the Misc section for any product not listed in the categories, parts or custom projects. Thanks!

+  MCI Console and Tape Machine Forum
|-+  MCI Consoles
| |-+  JH-600 Series Consoles (Moderator: Westrek)
| | |-+  About to refurb a knackered old 600 and will need your help!
« previous next »
Pages: 1 [2] Print
Author Topic: About to refurb a knackered old 600 and will need your help!  (Read 854 times)
Rob
MCI Member
***
Offline Offline

Posts: 212


« Reply #15 on: January 05, 2018, 06:27:56 PM »

Could you take a close up pic of the pcb on the faders please ?    The pack looks remarkably similar to what I have on my 428B which I have never been able to get documentation for.  The normal 600 fader packs look different & the pcb/circuit is also different from memory.     Next question do you have the docs to go with the fader packs  ?

Hey Rob of course I can I'm back in on Monday, unfortunately I don't have the manual for this particular console but I do have one for our other 600 if that's any help?

I have the standard 600 manual & the vca stuff is completely different.  The pcb on the standard one is different & it has an extra button under the channel mute .  & My console happens to be sea hawk grey or dove grey or what anyone else calls the colour of it.   I tried to draw the diagram but the board is double sided & a bit difficult to trace.    What i did find was that if one fualt happend you chenged one of the 2 ic's & another fault i had to change the other one.   I think one of them is a dual & I found that a 5532 works well in place of the original.  Although itwas a while ago that I restored mine & i can't remember what the faults were.
Logged
Pages: 1 [2] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!